Werk Stmk./Kleinlobming: Dorfstraße 5, A-8734 Kleinlobming
navigation:
position marker:
content:
Industrial valves – valves "The right valve function for every application"
Directional valves - DG...
Max. operating pressure: | Up to 350 bar |
Directional valves are available in a wide range of products in 3 or 4 configurations conforming to the IP67 standard for industrial and mobile applications.
They primarily control flow to a cylinder or the direction of rotation of a motor. Vickers directional valves are actuated magnetically, hydraulically, pneumatically or mechanically.
As of nominal size 10 upwards 2-stage valve versions with pilot actuation are also used. 9 different piston biases, 10 different electric connector interfaces and countless other options make the Vickers directional valves we supply an absolute must for any technician or buyer.
- Compact and low-cost
- Reliable and functional
- Minimal susceptibility to faults
- Many different variations possible
Valves for stacks "Vickers-MODULAR" stack valves
DGMC | Pressure limiting valve |
Max. operating pressure: bis zu 350 bar
Max. flow: bis max. 400 l/min
State-of-the-art hydraulic systems require compact valve stacks, which can best be implemented with the simply standardised Vickers modular system. In this way connection errors in pipes can be avoided at low cost.
Pressure control valves
Pressure limiting valves
Pressure reducing valves
Pressure shut-off valves
No matter whether they are used in conjunction with a mounting plate or integrated into the pipe direct, they can regulate pressure, perform multiple sensing operations or compensate pressure, all by remote control.
Max. operating pressure: bis zu 350 bar
Max. flow: bis 400 l/min
- Low power loss because the valves are power-regulating
- Cost of installation and space minimal
Flow control valves, variable
Throttle valves and throttle check valves
Flow control valves
Rectifier plates
Max. flow regulated: up to 106 l/min
Max. operating pressure: up to 315 bar
- Precision speed monitoring
- Extremely high degree of fine-tune control
Slip-in cartridges
Absolutely essential for high flows where pressure, current and proportional control functions are required.
Max. operating pressure: up to 350 bar
Max. flow: up to 5000 l/min.
- Fast
- Reliable
- Compact integration in blocks
Seat valves
Pressure limiting valves, discharge valves and check valves –
Max. flow: up to 5000 l/min
Sizes: NG6 to NG12
Hydraulically unlockable check valves
These hydraulically unlockable check valves operate in the same way as conventional valves and can also be opened by a piston using pilot pressure. This allows free return flow.
Matching base plates – intermediate plates on request