page areas:
navigation:
position marker:
content:

Modern axial piston pump technology from EATON and Linde

Modern axial piston pumps PVM from EATON
(for open or closed loop)

flow capacity:

from 18 to 141 cm2

interm. pressure

up to 350

constant pressure:

up to 280 bar

max. speed:

3600 rpm

Axial piston variable displacement pumps MPV-01 from Linde "Medium pressure" (closed loop)

Displacement variation: Hydraulic, mechanical-hydraulic, electric-hydraulic

Medium pressure "M":

280 bar

Very high pressure:

Up to 350 bar

Nominal sizes:

From 45 to 63 cm2


  • Wide selection of servo variation
  • Integrated feed pump
  • High-pressure feed valves

Axial piston control pumps MPR-01 from Linde
"Medium pressure" (open loop)

Medium pressure ("M"):

Up to 280 bar

Very high pressure:

Up to 350 bar

Nominal sizes:

From 28 to 71 cm2

  • Load sensing controller (LS)
  • Maximum pressure controller
  • Appropriate rotational speed possible owing to tank bias
  • Long-lasting satisfaction

Standard axial piston pumps 420 series from EATON
"Medium pressure" (open circuit)

"ADU 420" "Universal, professional and low-cost"
 


E-PUPI-TM002-E3.pdf

ADU_Prospekt

Displacement variation

Series ADU 420 is the latest new development in the EATON pumps sector. The established standard pump is ideal for industry and mobile applications on account of its compact design and technical properties. Proven successful in thousands of applications, it makes rival products look antiquated in terms of closed loop compatibility and economy. There will be an extension to the range of frame sizes shortly.

Frame sizes:

41 / 49 / 62 / 80 cm2

Max. continuous duty operating pressure:

Up to 280 bar

Max. peak pressure:

Up to 350 bar




  • Long-lasting and quiet
  • Optimised maintenance properties
  • Extensive accessories for variations and controllers

Axial piston pumps and motors / High pressure "For all those who want to get higher up!"

Axial piston pumps – high pressure


Axial piston pumps from Linde
"Concentrated high-pressure axial piston pump technology" from Linde

Axial piston variable displacement pumps HPV-02 from Linde
"High pressure" (closed loop)

Axial piston control pumps HPR-02 from Linde
High pressure (open loop)

Nominal sizes:

From 75 to 210 cm2

Max. pressure "H":

420 bar

Max. very high pressure:

Up to 500 bar

  • Used for many applications

Extensive range of accessories comprising directional valves, electronic controls, gearboxes and drive axles



"Hydrokraft" axial piston products – "Wherever applications are really demanding"

Heavy-duty "high pressure" series (for open or closed loop) 

Split up into model types PVW, PFW, PVX, PFX, TVW and TVX, there are up to 8 different sizes available.

Capacity:   

From 66 to 750 cm2

Geometric displacement:

From 450 to 1125 l/U min

Max. operating pressure:

Up to 350 bar (depending on configuration)

Max. peak pressure:

Up to 420 ba


Fixed and variable adjustments and an enormous number of options make the EATON Hydrokraft series the ultimate in technology for extreme applications in steel plants, rolling mills, presses, canal locks, ships, ...

"Wherever extreme operating conditions prevail and heavy duty is required."

Axial piston motors – high pressure



Axial piston fixed displacement motors HMF/R-02 from Linde  
"High pressure" / (open and closed loop)

Nominal pressure "H":

420 bar

Max. very high pressure:

500 bar

  • Uniform slow speed
  • Compact design
  • Long service life

Axial piston fixed displacement motors HMV/R-02 from Linde
"High pressure" (open loop)

  • Hydr. infinite, hyd. 2-stage, electrohydraulic ..., with integrated control direction

Nominal pressure "H":

420 bar

Max. very high pressure:

500 bar

  • Optimised starting and long-service characteristics
  • Zero swivel
  • High dynamic control response

Axial piston fixed displacement motors HMF-02 from Linde
"High pressure" (open and closed loop)

Nominal sizes from 28 to 210 cm2
Max. pressure "H" 420 bar
Max. very high pressure up to 500 bar

  • Robust and reliable